| | | | ANAPERALTA HOA - ARTIFICIAL GRASS OR TURF (ART) | | | Page 1 of 1 |
| | | SUPPLIER MATERIALS COMPLIANCE CERTIFICATION (SMCC) | | Revision 2 |
| | | | (Required for front yard installations) | | | | |
| SUPPLIER NAME: | | | | Date: |
| ADDRESS: | | | | |
| | | | | | PHONE: | |
| | | | | | | | | | | | | | | |
| HOME OWNER NAME: | | | | | |
| ADDRESS: | | PHONE: | |
| | | | | LOT #: | |
| | | | | | | | | | | | | | | |
SECTION 1 | WARRANTY | | | | | | | | | | | Supplier Acceptance Initials |
| Minimum Requirement: | | | | | | | | | | | | |
|
| 1. 12 years - no more than 40% color degradation or turf deterioration. | | | | | | | | | | | | | |
| Comments: | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
SECTION 2 | ARTIFICIAL TURF (ART) MATERIAL | | | | | | | | Supplier Acceptance Initials |
| Minimum Requirement: | | | | | | | | | |
| | 1. Non moisture absorbing materials (Blades, Base & infill) Infill designed as Pet Safe is | | |
| | exempt. | | | | | | | | | | |
| | 2. Grass Blade Color: Multiple shades of natural colors to promote realism | | | | | |
| | 3. Grass Blade & Base material to be Polypropylene, Polyethylene, Polynylon | | | | | |
| | or a blend of such. (Nylon is prohibited). Monofilament grass blades | | | | | |
| | are preferred and recommended for longer life. | | | | | | | | |
| | 4. ART material shall not contain toxic substances. LEEDS certified material is acceptable. | | | |
| | 5. Infill is required and shall be as specified by the Manufacturer. | | | | | | |
| Comments: | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
SECTION 3 | ARTIFICAL TURF CONFIGURATION | | | | | | | | Supplier Acceptance Initials |
| Minimum Requirements: | | | | | | | | | | |
| | 1. Grass Blade Length - 1.75 inches minimum above Base. | | | | | | | |
| | 2. Infill material shall be applied at 2 pounds per square foot minimum or as specified | | | |
| | by the Manufacturer. | | | | | | | | | |
| | 3. Infill shall not impede drainage of liquids. | | | | | | | | |
| | 4. Base material holding the stitched grass blades shall be either an open mesh or punched | | | |
| | holes. Hole punched base openings shall be on a uniform grid pattern with spacing to | | | |
| | accommodate 9 holes 1/8th inch in size per square foot minimum. | | | | | |
| | 5. The stitch gauge (spacing) for the Grass blades shall be 1/4 to 1/2 inch. | | | | | |
| | 6. The back of the base material shall be coated with an adhesive or encapsulant to secure | | | |
| | the grass blade stiches. | | | | | | | | | | |
| | 6. Pile weight shall be 60 to 108 ounces per square yard without backing. | | | | | |
| | 7. Yarn size - 12,000 denier minimum | | | | | | | | | |
| Comments: | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
Other Requirements: | | A sample of the selected ART material (approx. 12" X 12") shall be supplied to the Homeowners | |
| Association (HOA) with this form. | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | Date: | | | | | | | | Date: | | |
| Supplier | | | | | | | Anaperalta Homeowner | | |