Anaperalta Homeowners' Association

Anaperalta Homeowners' Association
5400 E Suncrest Rd.
Anaheim, CA 92807
ph: 714 785-2012
anaperaltahoa@yahoo.com

ARTIFICIAL TURF - Installation Cert

ANAPERALTA HOA - ARTIFICIAL GRASS OR TURF (ART)

Page 1 of 1

SUPPLIER INSTALLATION COMPLIANCE CERTIFICATION (SICC)

Revision 2

(Required for front yard installations)

SUPPLIER NAME:

Date:

ADDRESS:

PHONE:

HOME OWNER NAME:

ADDRESS:

PHONE:

LOT #:

SECTION 1

WARRANTY

Supplier Acceptance Initials

Minimum Requirement:

1. Two year Workmanship Warranty includes;

Joined section seams shall not separate

Water shall drain and not accumulate on the Artificial Turf (ART)

ART border edges shall remain flush to non-ART material (concrete, plastic, etc.)

ART shall not separate from ground base forming bubbles and raised areas

Seams shall be and remain undetectable to normal visual observation

ART border edges shall not allow ART base material to be visible

Defective or non compliant ART material shall not be installed

Installation techniques shall not nullify the ART material Warranty provided by the Manufacturer.

Comments:

SECTION 2

GROUND PREPARATION

Supplier Acceptance Initials

Minimum Requirement:

1. A sub-base of 3 to 5 inches od compacted aggregate material shall be installed under the Artificial Turf (ART)

surface replacing existing plant material and soil.

2. For ART material installed over native soil conditions, a layer of durable and porous fiber (woven or nonwoven)

shall be installed before the sub-base is added. This acts to stabilize the ART product.

3. Natural areas adjacent to ART areas shall not drain into the ART material area.

4. ART areas shall be graded to drain into the natural areas or into constructed or existing drainage paths.

5. A mow strip must be provided (6" minimum) when ART is installed next to a natural grass area. This is to

prevent mower damage to the ART material.

6. Water lines under ART areas shall be avoided.

7. Trees within an ART area shall have underground bubblers installed to water the tree.

8. Avoid sprinklers for natural areas spraying on ART material. Minerals in the water will deposit on the ART

material causing a visible residue (color change) over time.

Comments:

SECTION 3

ART Material Installation

Supplier Acceptance Initials

Minimum Requirements:

1. Infill material is required and shall comply with the manufacturers recommendation. It shall be applied

at 2 pounds per square foot or as specified by the ART material manufacturer.

2. Grain structure of the ART material shall be installed in a single direction.

3. ART edges shall be secured to the ground by mechanical means.

4. All seams shall be joined by gluing as a minimum.

5. Total surface area must be water permeable with minimum 25 inch/hour permeability rating.

Comments:

SECTION 4

Plans Required to be Supplied with this Form

Supplier Acceptance Initials

Plan 1. ART Area Definition

Plan 2. Ground Preparation & Sub-Base Stack-up

Plan 3. Drainage Definition for both Natural and ART areas. (Grade and slope definition)

Other Comments:

Anaperalta HOA requires that only licensed and ART material manufacturer approved installers be used.

Date:

Supplier

Anaperalta Homeowner

Web Hosting by Yahoo!

Anaperalta Homeowners' Association
5400 E Suncrest Rd.
Anaheim, CA 92807
ph: 714 785-2012
anaperaltahoa@yahoo.com